The delicate weaving of cables across a garter stitch background is just magical! This gently shaped cardigan is fun to knit and easy to wear.
This cardigan begins by working the upper yoke from left to right side using short row garter wedges to shape the neck. You then pick up stitches for the lower yoke that are divided for the body and sleeves.

SIZES
To Fit Actual Bust Circumference up to: 33 (37.75, 41.5, 47, 52.5, 56.25, 60.5)“ / 84 (96, 105.5, 119.5, 133.5, 143, 153.5) cm
1-4” / 2.5 – 10 cm of positive recommended.

FINISHED MEASUREMENTS
Bust Circumference: 34 (38.75, 42.5, 48, 53.5, 57.25, 61.5)“ / 86.5 (98.5, 108, 122, 136, 145.5, 156) cm buttoned.
Size 38.75” / 89 cm modelled with 3.5” / 9 cm of positive ease.
Finished Length: 21 (21.5, 22, 22.25, 22.75, 23, 24)” / 53.5 (54.5, 56, 56.5, 58, 58.5, 61) cm

YARN
C1: Jill Draper Makes Stuff ‘Rockwell’ (100% Cormo Merino Crossbreed Wool); 280 yds / 256 m per 4 oz / 113 g; Colour: Clear Skies; 3 (3, 3, 4, 4, 4, 5) skeins
C2: Daughter of a Shepherd ‘DK’ (75% Hebridean, 25% Zwartbles; 255 yds / 233 m per 3.5 oz / 100 g); 3 (3, 3, 3, 4, 4, 4) skeins
Approximate Yardage: C1: 668 (750, 818, 902, 993, 1066, 1174) yds / 610 (685, 748, 825, 908, 975, 1074) m; C2: 560 (627, 685, 755, 831, 892, 983) yds / 511 (573, 626, 690, 760, 815, 899) m.

NEEDLES & NOTIONS
US size 6 / 4 mm circular needle, minimum 40” / 100 cm
US size 6 / 4 mm dpns (if magic loop not used for sleeves)

Always use a needle size that gives you the gauge listed, as every knitter’s gauge is unique.

Stitch markers, stitch holders or waste yarn, tapestry needle, 9 safety pins, 9 buttons approx 0.75” / 20mm diameter.

GAUGE
19 sts and 38 rows = 4” / 10 cm in Garter Stitch
Lattice Cable Chart measures 4.5” / 11.5 cm wide

TECHNIQUES INCLUDED
German Short Rows, I-Cord Bind-Off, I-Cord Buttonhole.
Pattern stitch is fully charted and written.

ERRATA:
V2 March 19th, 2018
working all double sts as single sts instructions for the upper yoke were moved from Row 10 to Row 11.
v3: March 31st, 2018
In the first cable listed it calls out 2/2 LC when it should be 2/1 LC. The directions to work the cable are correct.